{"id":3466,"date":"2026-10-09T04:54:06","date_gmt":"2026-10-08T20:54:06","guid":{"rendered":"http:\/\/www.arasdamco.com\/blog\/?p=3466"},"modified":"2026-10-09T04:54:06","modified_gmt":"2026-10-08T20:54:06","slug":"what-raw-materials-can-be-used-in-a-film-blowing-machine-4abc-e457d4","status":"publish","type":"post","link":"http:\/\/www.arasdamco.com\/blog\/2026\/10\/09\/what-raw-materials-can-be-used-in-a-film-blowing-machine-4abc-e457d4\/","title":{"rendered":"What raw materials can be used in a film blowing machine?"},"content":{"rendered":"

If you\u2019re in the market for a film blowing machine, or already own one and want to get the most out of it, one of the most common questions I get is: \u201cWhat raw materials can I actually run through this thing?\u201d I\u2019ve been supplying film blowing equipment for over 12 years, working with small startup packaging shops and large multinational manufacturers across the continent, and the answer is never a one-size-fits-all. Every material brings its own quirks, and pairing the right resin with the right machine setup can mean the difference between a high-quality, consistent film and a messy, downtime-heavy production run. Let me walk you through the most common raw materials we work with, what makes each unique, and how to adjust your process to get the best results \u2013 based on real-world feedback from my customers, not just textbook theory. Film Blowing Machine<\/a><\/p>\n

<\/p>\n

First, the big one: Low-Density Polyethylene, or LDPE. This is the workhorse of film blowing, and it\u2019s the first resin I almost always recommend to new operators. LDPE is flexible, has good clarity (when you pick the right grade), and seals easily \u2013 perfect for everything from retail bags to bread packaging. I remember a customer in Ohio who started with a basic film blowing machine 10 years ago, and for the first three years, they only ran LDPE. They\u2019d buy it in pellets, feed it straight into the extruder, and get consistent, strong film with minimal effort. The key with LDPE is melt temperature: we typically set our machines to run LDPE at around 160\u00b0C to 180\u00b0C (320\u00b0F to 356\u00b0F). Go too high, and you risk degradation that makes the film brittle; too low, and the resin won\u2019t melt evenly, leading to thickness inconsistencies. Another perk of LDPE is that it\u2019s forgiving. If you\u2019re just learning to adjust the blow-up ratio \u2013 the ratio of the bubble diameter to the die diameter \u2013 you can tweak that without major issues. My Ohio customer eventually expanded into other materials, but they still keep an LDPE line running for their most popular, high-volume bags.<\/p>\n

Next, High-Density Polyethylene, or HDPE. HDPE is stiffer, more rigid, and has higher tensile strength than LDPE, which makes it ideal for heavier-duty applications like grocery bags, trash can liners, and product packaging for things like detergents. But HDPE is a little trickier to run than LDPE. It has a narrower processing window \u2013 meaning the temperature range where it melts properly without degrading is much smaller. We usually set HDPE runs at 190\u00b0C to 210\u00b0C (374\u00b0F to 410\u00b0F), and if you go even 10 degrees over that, the resin can start to break down, causing bubbles to pop or the film to have ugly, uneven streaks. I had a customer in Texas who tried to run HDPE on an older machine they\u2019d bought second-hand, and they were getting 20% waste in their first month. It turned out the heater zones on that machine weren\u2019t calibrated, so the melt temperature was too high. Once we adjusted the setup and shared their team\u2019s best practices for HDPE processing, their waste dropped to under 3%. Another thing to note about HDPE: it doesn\u2019t stretch as much as LDPE, so the blow-up ratio has to be adjusted carefully. Too much stretch, and the film will be too thin and weak; too little, and it\u2019ll be too thick and wasteful.<\/p>\n

Linear Low-Density Polyethylene, or LLDPE, is another staple, and it\u2019s become way more popular over the last 15 years because of its unique properties. LLDPE is a copolymer, meaning it\u2019s made from ethylene and another monomer, which gives it much higher puncture resistance than LDPE. That\u2019s why it\u2019s the go-to for stretch wrap, agricultural films, and shipping sacks that need to withstand rough handling. Unlike LDPE, which has long, tangled polymer chains, LLDPE has shorter, more linear chains, so it stretches more uniformly without breaking. The downside? LLDPE requires higher extrusion temperatures \u2013 usually 180\u00b0C to 220\u00b0C (356\u00b0F to 428\u00b0F) \u2013 and it\u2019s more sensitive to shear force in the extruder. If your screw isn\u2019t sized right for LLDPE, you\u2019ll get inconsistent melting and weak spots in the film. I work with a company that makes stretch wrap for freight, and they switched to LLDPE exclusively about five years ago. Their customers used to complain about stretch wrap breaking during delivery 8% of the time; now that rate is down to less than 1%, all because the raw material was a better fit for their needs.<\/p>\n

Polypropylene, or PP, is a trickier resin but worth the effort once you get the hang of it. PP is stiffer than most polyethylene resins, has excellent heat resistance, and is clear enough to use for things like food packaging containers, label films, and even some flexible packaging for snacks. But PP\u2019s melting point is higher \u2013 around 200\u00b0C to 240\u00b0C (392\u00b0F to 464\u00b0F) \u2013 and it\u2019s more prone to freezing off in the die if the temperature isn\u2019t consistent. If you\u2019ve ever had a bubble collapse mid-run, chances are it was either a temperature issue or you were running a resin like PP that requires steady heat. I had a customer in California who wanted to switch to PP for their snack packaging because it had better barrier properties than LDPE, but they kept having bubble collapse issues for three months. We helped them install a die heater with more precise zone control, and adjusted the cooling line setup to match PP\u2019s faster solidification rate. Now they run PP 24\/7 on their secondary machine, and it\u2019s become their most profitable product line. A pro tip for PP: it\u2019s helpful to use a slower extruder speed when starting a run, so the resin has time to melt evenly before it goes through the die.<\/p>\n

Now, let\u2019s talk about co-extruded films, which are made with multiple layers of different resins, and they\u2019re huge for specialized packaging. A lot of my customers don\u2019t realize their film blowing machines can be modified to run two, three, even five layers at a time. For example, you might have a layer of LDPE for flexibility, a layer of EVOH (ethylene vinyl alcohol) for gas barrier (so food stays fresh longer), and a layer of HDPE for strength. Or for frozen food packaging, you might combine PP for heat resistance and LLDPE for flexibility. The key here is that each layer has to melt at a similar temperature, otherwise they won\u2019t bond properly. EVOH, for example, is hygroscopic \u2013 meaning it absorbs moisture from the air \u2013 so before you run it, you have to dry it in a dehumidifying dryer for at least four hours. If you skip that step, you\u2019ll get bubbles and voids in the multi-layer film, and the barrier properties will be worthless. I had a customer who tried to run a three-layer film with EVOH without drying it, and they ended up ruining $20,000 worth of material in one shift. That\u2019s why we always emphasize material preparation as much as the machine setup.<\/p>\n

Of course, not all raw materials are virgin resin. A lot of my customers are interested in recycled plastic, which is great for sustainability and cutting costs. But recycled resin has to be processed carefully. Post-consumer recycled (PCR) LDPE or HDPE is the most common, but it has inconsistent quality \u2013 it might have impurities, different melt indices, or moisture content from its previous life as a milk jug or grocery bag. We always recommend testing a small batch of recycled material first before running full production runs. Some of our newer film blowing machines have advanced filtration systems that can catch small impurities, which helps reduce waste when running recycled resin. I work with a small business in Michigan that uses 100% PCR LDPE for their trash bags. They told me last year that switching to recycled material helped them boost their sales by 30% because their customers prioritize eco-friendly products. The only catch is that recycled resin can make the film slightly less clear, so if clarity is a top priority, you might need a blend of virgin and recycled material.<\/p>\n

There are also specialty resins, though we don\u2019t work with as many of these because they\u2019re highly specialized. For example, biodegradable resins like PLA (polylactic acid) are growing in popularity for single-use packaging, but they have very narrow processing windows and require specific cooling setups. I\u2019ve had a couple of customers try to run PLA on our standard machines, and while it works, it\u2019s not as forgiving as LDPE or LLDPE. Another specialty material is EVA (ethylene vinyl acetate), which is used for cling wrap and hot-melt films, but it\u2019s more expensive and has lower tensile strength than the polyethylenes we usually recommend for high volume.<\/p>\n

Let me circle back to something I always tell new customers: the best raw material for your film blowing machine depends on three things: what you\u2019re making, your production volume, and your budget. If you\u2019re running a small shop making low-cost retail bags, LDPE is the way to go. If you\u2019re making stretch wrap or heavy-duty agricultural film, LLDPE or HDPE will give you better results. If you need specialized packaging for food or medical products, multi-layer co-extruded films with barrier resins are worth the investment. And if sustainability is a priority, recycled resins can work \u2013 but you have to test and adjust your process to get consistent results.<\/p>\n

I\u2019ve seen too many customers jump into a new material without doing their homework, only to deal with wasted material, downtime, and frustrated teams. That\u2019s why at our company, we don\u2019t just sell film blowing machines \u2013 we provide ongoing support to help you pick the right raw materials, adjust your setup, and troubleshoot any issues that come up during production. If you\u2019re curious about which materials would work best for your specific project, or you\u2019re looking to upgrade your machine to run new resins, feel free to reach out and start a conversation. We\u2019ve worked with hundreds of customers to optimize their material and machine setups, and we\u2019re always happy to share the lessons we\u2019ve learned over the years.<\/p>\n

<\/p>\n

Now, for reference, here are the key sources that inform this advice, from industry standards to material technical sheets:<\/p>\n

Flexo Printing Machine<\/a> Modern Plastics Encyclopedia. (2022). Film Extrusion and Processing. McGraw-Hill.
\nPlastics Industry Association. (2021). Guide to Film Blowing Resins and Processing. SPI: The Plastics Industry Trade Association.
\nLDPE, HDPE, and LLDPE Material Data Sheets. (2023). Dow Chemical Company.
\nPolypropylene Processing Guidelines. (2022). Braskem America.
\nCo-Extruded Multi-Layer Films: Design and Application. (2021). Journal of Plastic Film & Sheeting.<\/p>\n

\n

Wenzhou Zhongqi Machinery Co., Ltd.<\/a>
Wenzhou Zhongqi Machinery Co., Ltd. is one of the most professional film blowing machine manufacturers and suppliers in China, featured by quality products and good price. Please rest assured to buy CE approved film blowing machine made in China here from our factory. We also accept customized orders.
Address: Room501-1, Building 23, Zone 3, Zhihui Industrial Park, Shangwang Street, Rui’an City, Wenzhou, Zhejiang Province
E-mail: SUE@WZZONQI.COM
WebSite: https:\/\/www.zhongqimachine.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

If you\u2019re in the market for a film blowing machine, or already own one and want … What raw materials can be used in a film blowing machine?<\/span>Read more<\/a><\/p>\n","protected":false},"author":35,"featured_media":3466,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3429],"class_list":["post-3466","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-film-blowing-machine-464d-e4958a"],"_links":{"self":[{"href":"http:\/\/www.arasdamco.com\/blog\/wp-json\/wp\/v2\/posts\/3466","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.arasdamco.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.arasdamco.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.arasdamco.com\/blog\/wp-json\/wp\/v2\/users\/35"}],"replies":[{"embeddable":true,"href":"http:\/\/www.arasdamco.com\/blog\/wp-json\/wp\/v2\/comments?post=3466"}],"version-history":[{"count":0,"href":"http:\/\/www.arasdamco.com\/blog\/wp-json\/wp\/v2\/posts\/3466\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.arasdamco.com\/blog\/wp-json\/wp\/v2\/posts\/3466"}],"wp:attachment":[{"href":"http:\/\/www.arasdamco.com\/blog\/wp-json\/wp\/v2\/media?parent=3466"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.arasdamco.com\/blog\/wp-json\/wp\/v2\/categories?post=3466"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.arasdamco.com\/blog\/wp-json\/wp\/v2\/tags?post=3466"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}